All HI-Q Calibrations Performed Per ISO/IEC 17025:2017 (ANSI/NCSL Z540-1-1994)
HI-Q Environmental Products Company offers a calibration and re-certification service for air flow calibrators and air sampling instrumentation.
Standard protocol requires recalibrating air flow measurement devices once or twice per year depending on use and sampling environment. HI-Q calibrates and certifies units against a N.I.S.T. traceable laminar flow element and furnishes a certification of accuracy with each unit.
Re-Calibration service charges vary depending upon the complexity of the service. The table below describes the recertification service ordering information for functioning air flow measurement units. Repair services are also available.
When shipping any items to HI-Q please complete and include the following form:
Ordering Information
Style | Flow Range and Scale Description | Cost Code |
Single Range (either SCFM or SLPM) | ||
V-FLO-Series | Low Flow, Single Range SCFM or SLPM Flowmeter/Rotameter | A |
AFC-Series | Low Flow, Single Range SCFM or SLPM Magnehelic | B |
HFC-Series | High Flow, Single Range SCFM or SLPM Magnehelic | C |
Dual Scale, Single Range (both SCFM & SLPM) | ||
V-FLO-Dual | Low Flow, Dual Scale SCFM and SLPM Flowmeter | B |
DSC-Series | Low Flow, Dual Scale SCFM and SLPM Magnehelic | C |
HFC-Dual | High Flow, Dual Scale SCFM and SLPM Magnehelic | D |
Dual Range, Single Scale (Low & High Flow, 2 Separate Gauges) | ||
AFC-15D | Specify Separate Flow Ranges (i.e..:0-3, 3-15) | D |
Dual Range, Dual Scale (Low & High Flow, 2 Separate Gauges) | ||
AFC-15D/425D | Specify Separate Flow Ranges (i.e..:0-3, 3-15) | E |
Electronic Programming Re-Calibration & Certification | ||
ELECTRONIC | Electronic Calibration & Certification (i.e.: Flow & Totalizer Calibration) | E |
Dry Gas Totaling Meters | ||
Dry Gas Meters | 5 Point Certification | F |